Measuring fixture×イマダ - メーカー・企業と製品の一覧

Measuring fixtureの製品一覧

1～7 件を表示 ／ 全 7 件

表示件数
Friction Coefficient Measurement Fixture COF Series

Friction Coefficient Measurement Fixture COF Series

Measure the friction coefficient of paper and film! Easily calculate the static friction coefficient and average dynamic friction coefficient with optional software!

The COF series friction coefficient measurement fixture is designed to measure the friction coefficients of materials such as paper and film. 【Features】 ■ Available in both vertical and horizontal stand options, allowing customers to choose based on their measurement space. ■ Measurements can be made in partial compliance with JIS/ISO standards. ・JIS P 8147: 2010 ・JIS K7125: 1999 (ISO 8295:1995) *Please refer to page P1 "Related Standards" in the COF series catalog for the corresponding fixtures for each standard. ■ Custom products are available that enable the measurement of friction coefficients for plastic films and sheets in partial compliance with ASTM D 1894-14. ■ By using separately sold graphing software, static friction coefficients and average dynamic friction coefficients can be automatically calculated. 【Usage Image】 Please refer to the "Related Videos" below.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cardboard Opening Test and Sealing Strength Measurement Jig 'DF-60'

Cardboard Opening Test and Sealing Strength Measurement Jig 'DF-60'

Simply insert and pull to easily measure! This hook fixture is ideal for measuring the opening strength of cardboard boxes sealed with adhesive.

The DF-60 is a tensile testing attachment used in combination with Imada's force gauge (load measuring device). The Imada force gauge, when combined with the attachment, enables various load measurements. 【Features of DF-60】 - It is an optimal hook fixture for measuring the hot melt adhesive strength of cardboard boxes. - It is inserted into the gap of the lid and pulled to measure the sealing strength. - It can be used for sampling inspections before shipment and for strength measurements during resealing. ■ For Imada's force gauges, please refer to the related products at the bottom of the page. * Our website features various load measurement videos using Imada products. ▼ Please check the URL below for testing videos of various packaging containers, including cardboard.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spout pouch cap opening force measurement device 'SPC-10N'

Spout pouch cap opening force measurement device 'SPC-10N'

An attachment perfect for measuring the opening force of screw caps on spout pouches! It is compatible with spout pouch containers of various sizes.

The "SPC-10N" is an attachment for measuring the opening force of spout pouch caps, used in combination with the Imada screw cap torque meter DTXS/A series. The Imada screw cap torque meter can achieve various torque measurements when combined with this attachment. 【Features of SPC-10N】 - It is ideal for measuring the opening force of screw caps on spout pouches used for refillable containers. - The mechanism that fixes the base of the sample allows for the measurement of the opening force of spout pouch caps, which are prone to deformation. - It can accommodate samples with a base cap size of 6 to 26 mm (depth and width). ■ For information on Imada screw cap torque meters, please refer to the related products at the bottom of the page. ■ We also offer measurement stands that improve measurement stability and software that is convenient for graph creation and data analysis. For more details, please visit our website. * Our website features various videos demonstrating load measurements and torque measurements using Imada products. ▼ You can also find videos of various torque measurements at the URL below, so please take a look.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Tensile Strength Measurement Fixture "Flat Chuck GC Series"

Tensile Strength Measurement Fixture "Flat Chuck GC Series"

A fixture for measuring tensile strength that can be widely clamped from thin samples to thick samples.

The "GC Series" is a flat chuck for tensile strength measurement that can be used for various purposes, from thin to thick materials. It can be attached to our force gauge and used as a fixture for tensile strength testing of various materials. This time, we have added a new lineup of the 【GCF-1200】 that can be used for multiple purposes by exchanging the claw part. With a maximum opening width of 30 mm, it can be utilized for a wide range of applications, and you can choose from a total of four types according to the load and opening width. 【Features】 ■ Wide opening width allows for a variety of applications ■ Choose from four types based on load and opening width ■ Attachments for tensile measurement that can secure materials from thin to thick * For more details, please refer to the PDF document or feel free to contact us. * The GCF-1200 is also available for purchase on Amazon (link below).

  • Other measuring instruments
  • Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Soldering Strength Measurement Jig SJ Series

Soldering Strength Measurement Jig SJ Series

Measuring the soldering strength of the QFP leads on the substrate and chip components! Compatible with various chip components with four selectable tip widths!

The QFP lead hook SJ-QFP-01 is a fixture suitable for tensile strength testing of QFP leads soldered to a substrate. The chip shear fixtures SJ-TIP-01/02/03/04 are designed to measure the shear strength of chip components soldered to a substrate. You can choose from four tip widths: 0.25mm, 0.5mm, 2mm, and 4mm. 【Features】 ■ It enables strength measurement in compliance with various JIS/IEC standards. - JIS Z 3198-6: 2003 - JIS C 62137-1-1: 2010 (IEC 62137-1-1: 2007) - JIS C 60068-2-21: 2006 - JIS Z 3198-7: 2003 - JIS C 62137-1-2: 2010 (IEC 62137-1-2: 2007) * For the corresponding fixtures for each standard, please refer to P1 "Related Standards" in the SJ series catalog. ■ Replacement blades for the consumable hooks, QFP45-SB-1, are also available for purchase (for SJ-QFP-01 only). 【Usage Image】 Please refer to the "Related Videos" below.

  • Work tools
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Grip Force Measurement Tool "PCA-150N"

Grip Force Measurement Tool "PCA-150N"

Wide range of support from industrial tools to everyday products! The opening width can be easily adjusted with the scale.

The "PCA-150N" is a gripping force measurement device that can handle a maximum load of 150N, allowing for the measurement of the gripping force, pinching force, and opening force of samples. It accommodates a wide range of samples, from industrial tools like tweezers, pliers, and clips to everyday products. The opening width can be easily adjusted using the scale. Measurement can be performed simply by attaching a force gauge, and it is lightweight and easy to carry. 【Features】 ■ Supports a maximum load of 150N ■ Capable of measuring a wide variety of samples from industrial tools to everyday products ■ Easy adjustment of opening width using the scale ■ Lightweight and easy to transport *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Variable Weight Reciprocal Friction Force Measurement Fixture 'VWF-10N-J'

Variable Weight Reciprocal Friction Force Measurement Fixture 'VWF-10N-J'

Measure the friction force between the flat test body and contact elements such as pens! It is also possible to calculate the static friction coefficient and average dynamic friction coefficient using optional software.

The "VWF-10N-J" is a device used to measure the frictional force between flat test specimens such as paper and contactors like pens. By changing the contactor holder, it can measure a variety of samples, and it also supports vertical load adjustment using weights and the measurement of reciprocating frictional force. Using separately sold graphing software, the static friction coefficient and average dynamic friction coefficient can be easily calculated. 【Features】 ■ A device for measuring the frictional force between flat test specimens such as paper and contactors like pens ■ Can measure a variety of samples by changing the contactor holder ■ Supports vertical load adjustment using weights and measurement of reciprocating friction *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.